We
accept the following Credit Cards
U.S. Residents Only
GenPro
Power Services
P.O.
Box 1116
Rapid City, South Dakota 57709-1116
Sales Contact:
Toll Free: 888.861.8984
Ph: 605.341.6160
Fax: 605.341.9791
Contact
Us
|
|
| ZENITH ZTSCT CLOSED
TRANSITION SERIES
AUTOMATIC TRANSFER SWITCH |
|
Description
Loads such as electronic
equipment, HID lighting, motor starters and the like are
sensitive to even the 30- to 100-millisecond outage experienced
during a typical transfer switch operation. Therefore, testing
and use of the standby system may not be optimized, and
necessary system checks may be omitted, because of concerns
about the effects of transfer.
In addition,
opportunities for peak shaving and utility incentive rates may
be passed over because of the inability to accept short power
interruptions.
The solution is GE Zenith
Controls' ZTSCT Closed Transition Transfer Switches.
Our proven switching
technology combines with controls developed through years of
experience with synchronizing switchgear to provide worry-free
transfers in a closed transition mode. With GE Zenith Controls'
high-speed drive system, the overlap of the normal and alternate
sources is less than 100 milliseconds. When one source is not
within normal limits, such as during a power outage, the ZTSCT
operates in an open transition mode.
Features and Benefits
 |
Incorporates the applicable features of the ZTS and ZBTS
Series
|
|
Source parallel time of less than 100 milliseconds
|
|
Closed transition operation (no power interruption) during
transfer and retransfer when sources are within specified
parameters
|
|
Open transition transfer operation is initiated upon a
source failure
|
|
Available in ZTSCT (utility-generator), ZTSCTU
(utility-utility), ZTSCTM (manual) configurations
|
|
Electrically operated, mechanically held
|
|
Segmented silver tungsten alloy contacts with separate
arcing contacts on 600 amps and above.
|
|
Arc quenching grids, enclosed arc chambers and wide contact
air gap
|
|
Components accessible for inspection and maintenance without
removal of the switch or the power conductors
|
|
Standard annunciation and operational selection package for
user interface
|
|
Active control of the generator governor not required, but
available as an option
|
Product Scope
|
Ratings 100 to 4000 amperes
|
|
2, 3 or 4 poles
|
|
Open type, NEMA 1, 3R, 4, 4X and 12
|
|
Available in Transfer Switch (ZTSCT) or ZBTSCT
(transfer/bypass switch) styles
|
|
Suitable for emergency and standby applications on all
classes of load, 100% tungsten rated through 400 amps
|
|
UL 1008 listed at 480 VAC
|
|
CSA certified at 600 VAC
|
|
IEC listed 480 VAC
|
|
|
|
|
|
|
Corporate Headquarters
GenPro
Power
Services
2121 Rand Road, PO Box 1116, Rapid City, SD
57709-1116
Ph: 605-341-6160 Fax:
605-341-9791
www.genpropower.com
© 1997-2008 GenPro Power
Services - All Rights Reserved
|
|
|
|
