|
|
| ZENITH ZTS SERIES
AUTOMATIC TRANSFER SWITCH |
|
Description
The GE Zenith Controls ZTS
Series of transfer switches—the building block of our
transfer switch product line—has become a hallmark of quality and
performance. This ruggedly built power contactor family of switches
is available in open construction for switchboard installation or
NEMA enclosed to your specifications. They are specifically designed
with dependability, versatility and user friendliness as top
priorities.
The power panel components,
which include power switching contacts, drive mechanism and terminal
lugs, are mounted on a specially formed panel for optimum
performance. Logic devices such as microprocessor control, auxiliary
time delays and special accessory equipment are mounted on the door
for ease of maintenance and to keep them separated from the power
section. They are connected with a numbered wiring harness equipped
with a disconnect plug that allows the control panel to be isolated
for maintenance.
Contact Nikki or
David for
information and pricing
Toll Free
888.861.8984
Ph:
605.341.6160
Fax:
605.341.9791
nikki@genpropower.com
davidp@genpropower.com
Taxes collected for South Dakota, Wyoming, and Nebraska
Features and Benefits
 |
Contact transfer speed less than 100 milliseconds
|
|
High
close-in and withstand capability
|
|
Temperature rise test per UL 1008 conducted after overload and
endurance tests in unventilated enclosure-exceeds UL
requirements
|
|
Available in
ZTS (utility-generator), ZTSU (utility-utility), ZTSG
(generator-generator) and ZTSM (manual) configurations
|
|
Double throw, interlocked operation
|
|
Electrically operated, mechanically held by a simple,
over-center mechanism
|
|
Segmented silver tungsten alloy contacts with separate arcing
contacts on 600 amps and above
|
|
Arc
quenching grids, enclosed arc chambers and wide contact air gap
for superior source-to-source isolation on all units
|
|
Control circuit disconnect plug and drive inhibit switch for
safe maintenance
|
|
Components accessible for inspection and maintenance without
removal of the switch or the power conductors
|
|
Mechanical indicator and contact chamber cover designed for
inspection, safety and position designation
|
Product Scope
|
Ratings 40 to 4000 amperes
|
|
2, 3
or 4 poles
|
|
Open
type, NEMA 1, 3R, 4, 4X and 12
|
|
Available to 600 VAC, 50 or 60 Hz
|
|
Suitable for emergency and standby applications on all classes
of load, 100% tungsten rated through 400 amps
|
|
UL
1008 listed at 480 VAC
|
|
CSA
C22.2 No. 178 certified at 600 VAC
|
|
IEC
947-6-1 certified at 480 VAC
|
|
• ASCO PARTS • ASCO 165 SERIES • ASCO 300 SERIES • ASCO 7000 BYPASS ISOLATION • ASCO 7000 SERIES • ASCO 7000 CLOSED TRANSITION • ASCO 7000 DELAYED TRANSITION • ASCO 7000 Series • ZENITH ZBTS BYPASS • ZBTSCT Closed Transition • ZBTSD ZENITH • ZENITH ZTS SWITCH • ZTSCT ZENITH • ZENITH ZTG SWITCH • ZENITH ZTGD • ZTGSE ZENITH • ZTSD ZENITH • ZENITH ZTX SERIES • |
|
GenPro
Power
Services LLC
2121 Rand Road, PO Box 1116, Rapid City, SD
57709-1116
Ph: 605.341.6160 Fax:
605.341.9791
www.genpropower.com
© 1997-2011 GenPro Power
Services - All Rights Reserved
|
|
|
|
