Home
GEN-PRO GPN-30H
GEN-PRO GPN-40H
GEN-PRO GPN-50H
GEN-PRO GPN-50EH
GEN-PRO GPN65H
GEN-PRO GPN-65EH
GEN-PRO GPN 75H
GEN-PRO GPN-75EH
Gen-Pro Accessories

We accept the following Credit Cards

U.S. Residents Only


GenPro Power Services

P.O. Box 1116

Rapid City, South Dakota 57709-1116

Sales Contact:
Toll Free: 888.861.8984
Ph: 605.341.6160
Fax: 605.341.9791
Contact Us

 

 

 

 

Gen-Pro Generator Accessories

 
Item No. ITEM Description Price
G12 Two-Wheel Dolly Kit Kit is shipped disassembled and has axle, handles, and 2 full pneumatic wheels, size 10" dia. x 4" wide. Fits all GPN, GPND, and PP portable generators, 3.0 to 7.5 kw. All larger sizes, 9.0 kw thru 15 kw, have built in 2 wheel full pneumatic 10” tires and lifting hook supplied as standard equipment.  
for $187
G16 "SPEED-MATIC" Automatic Engine Idle Device This automatic engine idle device will reduce engine speed by 35-40% while gen-set is not required to produce electric power. When 60 watts or more electric load is applied to gen-set, the engine automatically increases to full speed and full electric power. This device is installed only on contractor-rental GPGF series gen-sets and is designed to save fuel and wear while gen-set is not required to produce full power. Note: This accessory is not available on GPGF-150EC or GPGF-125EH  
for $355
G18 Loose Male Cap Plug to fit Mounted Generator Receptacles
G18-1 NEMA Number 5-15P = 15 AMP, 120 Volt, 1 Phase, 3 Wire Male Cap
 
G18-2 NEMA Number 5-20P = 20 AMP, 120 Volt, 1 Phase, 3 Wire Male Cap
 
G18-3 NEMA Number L5-30P = 30 AMP, 120 Volt, 1 Phase, 3 Wire Male Cap
 
G18-4 NEMA Number L14-20P = 20 AMP, 120/240 Volt, 1 Phase, 4 Wire Male
 
G18-5 NEMA Number L14-30P = 30 AMP, 120/240 Volt, 1 Phase, 4 Wire Male
 
G18-6 NEMA Number 14-30P = 30 AMP, 120/240 Volt, 1 Phase, 4 Wire Male
 
G18-7 NEMA Number 14-50P = 50 AMP, 120/240 Volt, 1 Phase, 4 Wire Male
 
G18-8 NEMA Number 14-60P = 60 AMP, 120/240 Volt, 1 Phase, 4 Wire Male


for $34


for $50

for $78
for $78

for $121

for $166

for $166

for $299
Equipment Notes

(1) VANGUARD, HONDA, KOHLER, and all diesel engines are heavy duty, over-head valve design and are intended for longer running applications. They have full protective wrap-around roll frame, 4 gallon fuel tank (3KW to 7.5 KW) and 8 gallon fuel tank (9KW to 15KW), plus and all safe "KLEEN-POWER" design for all plugged in electrical loads.

(2) These generator sets have all of the heavy duty generator and engine features, and are designed and built for the economy market. They have a full protective wrap-around roll frame and standard receptacle panel.

(3) LOMBARDINI generator sets are air cooled electric start diesel engines, used for portable, emergency electric power sources and can easily be transported from one location to another.

(4) ELECTRIC START: A 12 VDC electric starter motor is mounted on the engine and is controlled by a starter switch. A built-in battery charger circuit is included and will automatically charge up the starting battery while engine is running. On most engines, an emergency recoil-rope starter is included as a back-up manual starting method. All generators have battery tray, battery cables, and battery hold down clamps. IMPORTANT: The 12 VDC starting battery is not furnished and must be supplied by the user.

(5) New, improved 3-wired power system allows "automatic" balanced electric loads on all 120 volt receptacles eliminating vibration chatter and premature failure due to unbalanced load problems.

(6) New, improved "KLEEN-POWER" design allows GEN-PRO to be safely used on any electric loads. "KLEEN-POWER" holds sine wave harmonic distortion to just 6%, allowing these gen-sets to be safe to use without concern for plugged-in load destruction, when using frequency or voltage sensitive equipment.

(7) The "LineGuard" ground fault circuit interrupter (GFCI) is a sensing device designed to sense dangerous levels of electric current within all types of electrical tools and equipment, leaking to ground, and therefore avoiding dangerous shock potential to electrical equipment operators. This "LineGuard" sensing device conforms to UL943 and OSHA job-site requirements for worker protection against potential electrical shocks.

 
 

Note: All prices are subject to specific discounts.

Home • Up • GEN-PRO GPN-30H • GEN-PRO GPN-40H • GEN-PRO GPN-50H • GEN-PRO GPN-50EH • GEN-PRO GPN65H • GEN-PRO GPN-65EH • GEN-PRO GPN 75H • GEN-PRO GPN-75EH • Gen-Pro Accessories

 

GenPro Power Services
2121 Rand Road, PO Box 1116, Rapid City, SD 57709-1116
Ph: 605.341.6160  Fax: 605.341.9791
www.genpropower.com
© 1997-2010 GenPro Power Services - All Rights Reserved