We
accept the following Credit Cards
U.S. Residents Only
GenPro
Power Services LLC
P.O.
Box 1116
Rapid City, South Dakota 57709-1116
Sales Contact:
Toll Free: 888.861.8984
Ph: 605.341.6160
Fax: 605.341.9791
Contact
Us
|
|
Exeltech
Inverter Systems
EXELTECH INVERTER
SYSTEMS
GenPro Power Services offers complete EXELTECH Inverter systems.
EXELTECH manufactures the worlds
first truly redundant, modular inverter system; the most reliable
inverter system available. No single malfunction will cause the
inverter system to fail. Modules are "hot" insertable. Power
levels are expandable, and can be added or replaced without
interruption in power to your critical loads.
Exeltech Components are as follows:
 | Power Module -
this is a 1000 Watt slave power inverter. It requires drive
signals from a Master Module or Control Card as described below.
This module is the backbone of the inverter system and will be
the majority of the modules inmost systems. |
| Master Module -
This is a 1000 Watt power inverter which contains all the
electronics necessary to operate. It requires an enclosure to
provide connections to the battery and AC output. This module
can also operate up to 19 slave Power Modules as listed above.
If this module is used to operate the slave modules the system
cannot be fully redundant. |
| Control Card -
This card will generate all the signals necessary to operate up
to 20 Power Modules. The card itself will not generate any AC
output power nor does any power flow through it. This card can
be paralleled with another Control Card to generate a redundant
set of control signals to form the basis of a completely
redundant inverter system. |
| Alarm Card - This
card can be used in conjunction with a redundant or non
redundant inverter to provide various alarm output signals to
the user via LED's and alarm contact closures. It must be
included in redundant systems to detect failure of control card.
|
| Transfer Switch -
Provides all the same functions as the alarm card, plus provides
a relay to transfer AC power to the load from either the
inverter of the utility input. Use only with system 7KW or less.
|
| Cage Assembly -
Required on all MX Series Inverters, the cage provides
connections to the battery and provides AC output. |
|
Visit:
www.exeltech.com
Features Include:
|
N+1 Redundant
|
|
Expandable
|
|
"Hot" Insertable
|
|
Adjustable Power
|
|
1000 watt modules
|
|
True sine-wave
output |
|
1000 watts to 20kW
single-phase |
|
2000 watts to 40kW
Bi-phase |
|
3000 watts to 60kW
Three-phase |
|
12vdc to 108vdc
inputs |
|
Available in 50Hz,
60Hz or 400Hz |
|
21.5 Years MTBF
|
|
Remote metering
|
|
Remote switching
|
| |
|
Contact Nikki or Dave for
information and pricing
Toll Free
888.861.8984
Ph:
605.341.6160
Fax:
605.341.9791
nikki@genpropower.com
davidp@genpropower.com
Taxes collected for South Dakota, Wyoming, and Nebraska |
|
|
|
GenPro
Power
Services LLC
2121 Rand Road, PO Box 1116, Rapid City, SD
57709-1116
Ph: 605.341.6160 Fax:
605.341.9791
www.genpropower.com
© 1997-2011 GenPro Power
Services - All Rights Reserved
|
|
|
|
